How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of special steps to install a second ignition key. It requires dealer assistance using the handheld computer known as Tech-2. Then a new key as well as transponder need to be bought and then programmed to the car.
Rotate your keys to prevent one from wearing out quicker than the other. This will keep your keys in top condition.
Replacement Case
The new key fobs are not like the old Saab keys. They are equipped with electronics that make them difficult to duplicate. This has made stealing cars much more complicated than it was 20 years ago. But, it has also made the replacement of lost keys a much more expensive task.
Saab 9-3 owners must have two keys that work. It is costly to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers usually charge between $100 and $200 to complete this.
There are some ways around these expensive. Some parts providers will use the code of a spare key to cut a brand new metal blade for a fraction of what the dealer charges. The key must be exactly the identical to the original one for it to function in your vehicle.
You can also change the case yourself by following these steps. You'll require a flathead and patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. Once the case is open take out all electronic components and put them back in your new case. Make sure you put the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced easily and quickly. This YouTube tutorial for DIY Cyclone Cyd shows how to replace the battery for the remote key fob in only four steps. This tutorial should work for any modern saab-type key fob, however, the procedure may differ slightly.
This button is usually placed just below the Saab logo on the back of the fob. saab 93 key is usually found on the back of your fob, just below the Saab Logo. Then, use a flathead screwdriver into the small hole inside this button. This will be enough to allow you to open the fob's case so that you can replace the battery.
After you have installed the battery CR1632, you are able to reassemble the remote key fob. Then, you can program it into your car. The entire process shouldn't exceed an hour. It's a simple procedure that doesn't require any special tools.
The process is a bit more complicated in the event that you lose your key, but it's possible. The dealer will need to read the car's VIN and then order a new key blade and TWICE module, both with the exact unique code. The dealer will then have to program the key using MDI an innovative software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car. It is equipped with an internal battery. The batteries last for a period of and eventually die. It is a common problem with all cars. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that have all the electronic components in place. You can simply pop the case open and replace the batteries. It is important to remember that you'll have to remove the emergency key first, and you can do this by inserting an incredibly small screwdriver with a flat head into the slot in the middle of the case. Work the screwdriver around the case until it is split open, making it easier to take it out.
If you are about to replace your keys, ensure you have a spare as this can reduce the total cost by a substantial amount. If you have an extra key, request the dealer to cut the key and program it for your car. This is less expensive than purchasing a new fob.
If you do not have a spare key car key, you can add a second key to your car, however this requires a lot research and effort. The cost for adding a second key is a few hundred dollars, and it requires programming of the car's computer. Professionals can accomplish this however it's a costly option.
Replacement Ignition
In contrast to the earlier Saab automobiles, the new SAAB 9-3 models are equipped with a much more sophisticated alarm system that is based on a coded key. If you lose your primary key, it may be costly to get another one since the car needs to have a special computer added and also be programmed to accept a brand new key. Even dealers can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.
Dealers will charge you a premium to replace your car computer (also known as the CIM or SAAB twice) in the event that you lose the only working key. We can reprogram the EEPROM of your car's computer to make it ready to accept an additional key. This will save you more than 50% of the cost you have to pay the dealer.
If you've been a faithful owner of an 03-11 SAAB 9-3, you probably are aware that the ignition key isn't really all that robust. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become sticky and the buttons have been known to fall off. It's good to know that replacing the ignition key isn't as difficult as it sounds and can be done in a short time using the appropriate tools.